UTEK USB 2.0 TO RS 422/ 485 CONVERTER CABLE INDUSTRIAL GRADE (USB-CABLE 1.5M)

Utek USB 2.0 to Serial RS- 485/ 422 Converter 1.5m (UT-890A) Description: As the PC industry growing, most of the low-speed external ports are replaced by USB port. In industrial environment, lots of important equipment’s still adopt RS-485/422 interface design. UT-890A provides connection for point to point, point to multipoint communication. For point to multipoint mode, each converter is allowed to connect 32 sets RS-422 or RS-485 device with baud rate 300-921.6Kbps. The power and data flow indicators show the status of the communication. UTEK USB To RS485/ 422 Converter (UT-885) Description: UT-885 is a universal USB to RS-485/422 converter, there is no need of external power supply. It complies with USB, RS422, and RS-485 standards; it converts USB signal to a balanced differential RS-422 or RS-485 signal. This converter is with built-in zero delay auto receiving and transmitting conversion and unique I/O circuit auto control data flow direction without any handshake signal (RTS, DTR); there is no need jumper wire setting for full duplex (RS-422) and half duplex (RS-485) mode, plug & play. It is compatible with current communication software and hardware. Feature: Model: UT-890A, UT-885 - Standards: USBV1.1, 1.0, 2.0, RS-485, RS-422 EIA - USB Signal: VCC, DATA+, DATA-, GND, FG - RS-485 signal: T/R+, T/R-, GND - RS-422 signal: T/R+, T/R-, RXD+, RXD-, GND - Working mode: Asynchronous, point to point or point to multi-point, 2 wires half-duplex or 4 wires full-duplex - Direction control: Adopts traffic direction auto control technology - Baud rate: 300-921.6Kbps auto-detect serial signal - Loading capacity: Supports point to multi-point communication, allows to connect 32 sets RS-422 or RS-485 device - Transmission distance: 1,200m(9,600bps) for RS-485/422, no more than 5m for USB - Port protection: Surge, ±15KV ESD protection (UT-890A), 600W lightning, surge, ±15KV ESD protection (UT-885) - Connector: USB-A male, DB9 male (UT-890A), USB-A male, RS-485/422 5-pin terminal block (UT-885) - LEDs for indicating PWR TXD, and RXD activity - Transmission media: Twisted-pair or shielded cable - Length: 1.5m (UT-890A), Dimension: 62×33×16mm (UT-885) - Operating temperature: -40? to 85? - Relative humidity: 5% to 95% - Transmission distance: 0-1,200m (921,600bps-300bps) - Supports: Win2000/2003/2008/2012/XP/Vista/7/8/8.1/10/CE/Mac/Linux