Spanjaard *Spanjaard Automotive Belt Dressing Spray (400ml)

Maker : Spanjaard BELT DRESSING Product Code: Spanjaard 50-310-400 Packing: 400ml aerosol spray Product Description An anti-slip Spanjaard Belt Dressing preparation that revives old belts and makes new belts last longer. It is used to penetrate and adhere automotive rubber belt and prevents belt slippage due to heat, cold, dampness, dust and glazing. Applying this product is a possible inexpensive way to fix the squeak sound of the slipping rubber belt against the pulley. It can help ensure longevity of rubber belts (timing, serpentine) and save you from spending too much on the rubber belt maintenance. Application A specially formulated product that penetrates and adheres strongly to all belt materials, rubber, leather and fabric. It dries quickly to give increased pulling power on all types and shapes of drive belts. The synthetic film gives longer life to old and glazed belts and will not cause hardening, cracking or staining. It contains no rosin, asphalt, tar or oil which will attack the belt. It will remove old deposits if used regularly and adheres to all belt materials without attracting dirt or dust while preventing the 'squeal' caused by belt slipping. Expensive new and difficult to replace belts last longer. Application Instruction Aerosol: Fit the extension nozzle and spray the belt and sheaves, preferably through the safety guard while the belt is running. After use, invert can and spray to clear the nozzle, to prevent blockage. Bulk: Spray or brush onto belt. Belt must be stationary if brush application is used.